Download MobaXterm here

This is an example of how to setup an SSH tunnel using MobaXterm.  Depending on what you're trying to remotely display, your port number(s) may be different.  These settings are to be used when setting up UB Box on CCR's transfer server - following these directions

Start MobaXterm and click on the Tunneling icon.  Then click on the New SSH Tunnel button:

Configure local port forwarding as shown below - make sure to specify your CCR username in place of <defaultuser> and click Save:

Click on the 'key' icon to select the SSH key you have loaded into the CCR IDM portal (instructions for doing this can be found here)

Click on the blue arrow Start button to initiate the tunnel:

Complete the instructions to finish the UB Box configuration instructions here

When you're done, you can stop the tunnel by pressing the green square button.